Today our new item-gear metering pump 15cc has been sent to Poland successfully

Today our gear metering pump 15CC has been sent to Poland successfully on October, 2016. 



The main advantages of using hot melt gear metering pumps:

1. Stabilizing the output pressure --- the pressure on extruder can be reduced by 30%-50% after using melt pumps;

2. improving the product quality;

3. increasing the extrusion output-reducing pressure on screw and chaning the building pressure from "screw to die" to "melt pump to die", so the screw can extrude the products with high efficiency. Meanwhile the back pressure on the extruder can be adjusted, reducing the melt residence in screw cylinder, stabilizing the plasticizing process and improving the product's quality and quantity;

4. prolonging the working life --- the pressure of extruder screw can be lowered after using the melt pumps, so screw wear can be reduced consumable.




1. Polymer extrusion molding, such as granulation, film, pipe, plate, sheet, etc.

2. Transporting high-viscosity materials such as PC, PMMA, ABS, HIPS, PET, PVB, PS, PP, PA, PE, PVA and so on.

3. Simultaneously, transporting rubber, asphalt, paint, adhesives, coatings, lubricants, Polyalcohol and other

non-particulate impurities.

4. Pressurized transporting and spinning polyester for cotton-fiber, polypropylene and other chemical fiber melt.